Visual effects supervisor Peter Timberlake discusses his Plastik toolset.
In Curry Barker’s Obsession, Bear (Michael Johnston) is a hopeless romantic who, after failing to express his feelings for childhood friend Nikki (Inde Navarrette), breaks a mysterious novelty item called the One Wish Willow and wishes that she would love him more than anyone in the world. When the wish comes true, Nikki is cursed, and her affection quickly develops into a frightening, uncontrollable obsession, transforming Bear’s romantic fantasy into a nightmare.
Obsessive facial expressions made by Nikki during the film reach unsettling levels. A mix of practical make-up and 2D compositing techniques aided in pushing Navarrette’s impressive performance even further into a deliberate Uncanny Valley. Importantly, the visual effects enhancements were of the invisible variety, remaining as only subtle shifts to the actor’s facial features.
Here, befores & afters talks to production visual effects supervisor Peter Timberlake about the tools and techniques his studio, Queen, relied upon to craft those subtle facial augmentations. He also mentions other VFX-related work in the film, ranging from a unique approach to previs, the blood and gore enhancements, and a completely undetectable visual effects shot for the final scene.
Uncanny Valley: the facial enhancements brief
Timberlake shares with befores & afters the initial brief to Queen for the facial augmentation shots: “Curry wanted to push Nikki into the Uncanny Valley without much elaboration on what pixels needed to go where, but rather just the impression that the audience needed to get when they came across Nikki. As visual effects artists, we just tried stuff to see what Curry reacted to. Our early tests started with us taking stills, as well as full shots, of Nikki’s face and modifying them and running them by Curry and seeing what he thought.”
“I think what I didn’t fully realize at the time,” adds Timberlake, “is how thorough the theme of the Uncanny Valley runs through Obsession, through every department. Even down to how the script is written, where Curry wrote scenes where Nikki is hot and cold, where she’s saying how much she loves him, and then in the next breath is totally angry at him. It’s not the Uncanny Valley in the traditional sense, but it gives you this weird destabilizing effect where you don’t really know what’s in her mind.”

An example of a scene that helped Timberlake understand this move into the Uncanny Valley was the first interaction Bear has with the obsessed Nikki. “Curry shot it two ways, one where Nikki was into Bear and another where she was totally friend-zoning Bear. And then he intercut those takes so that the audience, shot-to-shot, is feeling, ‘Oh, she’s into him,’ and ‘Oh, she’s not into him.’ I think that the ambiguity and lack of knowing there gives it that Uncanny Valley effect. Curry also mentioned that he had given Nikki a line where she said that her cat died and her cat didn’t die, but Bear’s cat did die in the film. Curry said that that kind of half-truth was his extrapolation of the Uncanny Valley theme into a character’s line. Curry wanted to build out this Uncanny Valley-type of philosophy into the visuals of the film.”
The idea was all about dualism. You see that throughout the movie—there’s all these famous shots of her smiling and saying, ‘No, no, no, no.’ Or the shot where she’s frowning, and gets a laugh from the audience. We wanted to give the audience two emotions at once. One, the emotion that her muscles convey, and two, the opposite ‘gut feeling’ that is being conveyed. There was even a brief that Curry gave the make-up team that was: ‘Paint kind of like a smiling Kabuki-style puppet make-up onto her, but her actual face is going to be frowning.’”
For the enhancements, Timberlake admits that he thought the director was initially looking to add a more ‘feral’ look to Nikki. “It was a look that we’ve probably seen in a handful of movies. I think V/H/S is my favorite example of a more feral look that is definitely Uncanny Valley. But that look is more like the character’s been raised by wolves, and not what Curry was going for. We did try that and ran it by Curry and he was like, ‘Why don’t we try doing basically the opposite of what you’ve just done here?’”
“He did not want the eyes to be really big,” adds Timberlake. “He didn’t want the features and the performance to be exaggerated. We wanted them to be almost mismatched and done in the opposite direction. So when her eyes are really big, we want to make them really small. And when her mouth is smiling, we want to tilt it down. What this actually achieved in the end was communicating a mixed message, where you feel that there’s one Nikki that’s the obsessed Nikki, and then there’s this trapped Nikki underneath who is frowning while smiling or smiling while frowning, or something that would be impossible for an actor to do without the unintentional visual philosophy behind it.”
The Plastik toolset
To tackle the facial enhancement shots for Obsession, Timberlake and his team at Queen worked within their proprietary toolkit called Plastik. “It’s built primarily within Nuke, and then a handful of other tools that we have written scripts around in order to get them all into Nuke. That’s mostly because Nuke is where our final comps are coming from and what the artists are familiar with. Originally we had used it for an earlier project where there was a CG thing that was on a character’s skin and it was not lining up. We used this tool to pin little pieces of skin so that the transform was diffused across a large area, making the skin and the CG elements stick. The underlying technology was then transferable to all different types of skin and features that have perspective shifts. It lets us work in screen space once and have the transformation survive through perspective shifts and changes in performance.”
Timberlake acknowledges that typically for facial augmentation work, you might normally head down a geometry tracked-based workflow. But since this was a low-budget film, it was determined that geometry tracks were not the desired approach. Instead, a 2D workflow with Plastik / Nuke was utilized. Here’s how a facial enhancement shot was carried out.
“As an artist,” explains Timberlake, “you would be working on one frame and getting that one frame right. The controls are the same as the transform node controls in Nuke, but you can choose what area of the face you’re transforming and how that falls off. On a typical shot, we would probably be using six to 12 layers of transforms where we’re focusing on left eye bottom, right eye bottom, left eye side, right eye side, mouth, etc etc. After you get it done in one frame, it typically will track throughout both the performance and through perspective shifts in her face. That enabled us to do a pretty large amount of work without relying on geometry tracks, which have a lot of upstream dependencies and make computers run slower and just make the pipeline crunch a little bit more.”
Timberlake continues on the process: “After the initial tracking step is done, we can be very, very flexible. I remember once I was actually on the phone with Curry. I pulled up a shot and over a screenshare, I was just pulling and pushing stuff around, We went from, ‘This is wrong’ to ‘This is awesome’ in probably five minutes. Obviously that was on one frame and we had to make sure that that frame worked across the entire shot, but that was a cool experience to be like, ‘I can do a real-time session with a director using this toolkit.’”
It was a learning curve for Timberlake to work out exactly what the director was after, but ultimately extremely subtle augmentations were settled upon. “I think that our first rounds to Curry were more noticeable, partly because we had made an assumption, not really being that familiar with Curry’s work, that he was just another genre filmmaker who was making low-budget horror movies and he wanted to shock everyone with this character. And it turned out that he was going for something a lot more nuanced and he told us to basically dial it back quite a bit. And because of that, I think that the effect is a lot more successful.”
Not previs, but lightvis
Director of photography Taylor Clemons planned out scenes in the film by previsualizing moments with Unreal Engine. But, says Timberlake, it was not in the usual ‘previs’ sense. “He did previs specifically designed for lighting and blocking. It’s something I’ve called ‘lightvis’. I think without this tool, Obsession would probably have been impossible. I mean, Curry and Taylor together spent hours in the software—there was a little log of the time they spent in there and it was thousands of hours. They would first import a LiDAR scan of the actual locations and then they’d put in lights and characters and move cameras around. The idea was, it basically gives you a menu of every ingredient that you have at your disposal. It gave them time to find the movie.”
“With Unreal Engine and all the accurate real-world lights in there,” continues Timberlake, “you can get a pretty close result before you step foot on set. And then when you go onto set, you’re feeling a lot more prepared and ready to be with the actor instead of having to figure out all of the logistics. And you’re giving your Grip & Electric crew all of this data that says, ‘Here’s what we’re going for. This light goes here and this light goes here.’ It means we don’t have to spend all this time messing with lights and figuring out the look of the scene. It’s something that any young filmmaker can do, or frankly any seasoned filmmaker can do, too. I think it makes these small budget features a lot more viable as long as the artistic vision is there from the beginning.”
The lightvis process came in handy, too, for some LED wall shooting that was used for filming car scenes. “Credit goes to Taylor on this, again,” says Timberlake. “We used pre-shot footage rather than Unreal Engine footage on the LED wall. I think the end shots worked so well because they are dark and are lit the same way that he would light anything else. Taylor seems to understand that just because it’s an LED wall, it doesn’t mean that all of your cinematography rules go out the window. He did a few clever things, one of which was make the windows really dirty and smudgy and it gives you this interactivity between the talent, the midground set—which in this case is a car in most cases—and then the actual lights on set, that filters the LED wall through this layer that almost simmers it into something that all feels locked together.”

Classic horror effects
Since Obsession is a horror movie, Queen was called upon to enhance a few moments of blood and gore. One moment sees Nikki smash a character’s head into a brick placed on a car steering wheel. “For the head smash,” outlines Timberlake, “the approach was to take a performance of a test dummy, which was a prosthetic of the actress, and then to use a take of the actress and basically extract textures from each of them and blend them together as the take goes on. So, we took the real actress’s face, put it on the test dummy, then we took gore elements from the test dummy and put it on the real actress’ face. For each consecutive hit, it progresses from the real actress to the full gore test dummy.”
Smaller visual effects augmentations related to blood and gore included dealing with a character being shot and removing some blood tubing. Another kind of horror effect Queen worked on required close collaboration with the editing of certain scenes, as Timberlake breaks down. “In his temp edit, Curry had done a lot of these smash cuts. So, we’d go from one performance of a character with a bottle, bringing it to their head, and not hitting their head, and then the next frame is them doing a separate take where they do the reaction. He had intentionally cut a few frames to make it look more sudden. In our first few versions, we had made it more natural, without the missing frames. But Curry asked us to keep it without the frames. My interpretation of that was that he wanted it to look a little more horror genre-y, and lean into the genre, or it could be that he just fell in love with his original edit. Either way, audiences seemed to like it.”
That end shot
Spoiler alert: the film ends with Bear’s character dying on Nikki’s lap, which releases Nikki from the curse. A lengthy shot required some completely invisible effects intervention.
“In the take, they were coming off some intense action and the actor was breathing heavily. Well, since it was massively important that the character is not breathing,” points out Timberlake, “we were asked to make his chest still—which sounds easy and I thought would be easy at first—but the problem is that Nikki is messing with his body and his shirt a lot, so we had to retain all of the motion that was related to her, while stabilizing the underlying motion. It turned into a really challenging shot that was also very long and one we can’t really brag about. You can’t say on your reel, ‘Look at how this character isn’t doing something!’ It’s the quintessential ‘can’t put it on your reel’ shot. But it was central to the plot, to show that this character wasn’t breathing.”






